All posts by: gkmill

For different types of Raymond mills, the performance gap is due to structural differences, but the specific working principle is similar, and no matter what kind of material processing process, the working principle is unchanged , Here is to introduce the working principle of the machine. All milling equipment can process smaller materials, so they […]

In feed industry, people usually add some trace substances in feed production and processing. Though it is very small quantities, there is a significant effect. Calcite is one ingredient for feed additive,Feed additives which include crushed calcite powder with fineness between 80mesh and 100mesh are essential in modern feed industry. Through improving the nutritive value […]

The following is a brief analysis of the hazards and preventive measures of the belt conveyor belt in the vertical roller mill production line. After the belt conveyor is broken, the tape will naturally fall and the conveying opportunity will be reversed. If there is a broken belt in the conveyor that is running with […]

Mechanical Factors for Vertical Roller Mill Vibration Common mechanical factors are mainly caused by equipment quality and installation quality problems. The main causes of vertical mill vibration are: The roller lining and the grinding disc are not installed firmly; The horizontal error between the reducer base and the foundation exceeds the specified range; The stopper […]

During the operation of the vertical mill, the control system can be used for data monitoring and information feedback. According to the feedback information, the central control operator and the field equipment personnel can make adjustments to the system related data and equipment control. However, if the feedback data of the rotation measuring instrument or […]

Adjustment of Grinding Pressure The central control operator should pay attention to the feedback value of the grinding pressure in time. When the grinding pressure is lower than the set pressure, it should be filled with nitrogen immediately to increase the grinding pressure. The balance between the three stretching rods should be ensured during the […]