Limestone mill is a very wide range of materials used in various industries. The application of industrial development in different industries in China has a corresponding range. Each ore material can be processed very well after processing. However, if limestone is to be applied to various industries, it needs to be processed by ore processing equipment. For the processing of limestone, we have corresponding analysis of GK, because the application fields are relatively fine, such as Building materials, paints, etc., these are places where limestone can be applied.
After GK’s analysis of the requirements for limestone applications and the corresponding manufacture of equipment, the production of milling equipment of various capabilities paves the way for the production of limestone, because not every industry has the same application for limestone, so its processing equipment is also Inevitably, the Limestone grinding mill is used by more and more industry manufacturers in the market, and its advantages are slowly being discovered by everyone, and various applications are slowly growing out invisibly. Nowadays, it is in the hot weather in summer. Every ore processing equipment needs to be cooled and heat-proofed when it is used, especially the limestone mill. Because limestone is exposed to sunlight, it is very likely that the temperature will rise, and when it is processed accordingly, There is also a certain influence inside the equipment. Everyone knows that if the internal temperature of the equipment is too high, it may have a certain impact on our production efficiency. Although it does not mean that the impact is large or small, it is for our production efficiency. A very big drawback.
Therefore, the limestone mill should pay special attention to the heatstroke prevention work when it is used in the summer. In order to improve the production efficiency of our equipment, please pay attention to each aspect and check it regularly to ensure the normal production efficiency of our equipment. There are three reasons for the bearing overheating, insufficient bearing lubricant, grease deterioration and bearing damage. We mainly solve by adding lubricant in time. If we encounter bearing damage, we need to replace the new bearing; The percussion sound is generated inside the limestone mill, and the knocking sound is generated inside the machine. There are three main reasons: the debris enters the inside of the crusher; the parts of the fixed part of the liner are loose; the hammer or other parts are damaged. In the event of such a malfunction, we must first stop the operation of the limestone mill to avoid damage to the host equipment. Then, clean the limestone mill; tighten the fixing parts of the liner; and replace the damaged parts in time. Unbalanced placement is the main cause of the imbalance in the operation of the limestone mill; of course, if your machine is worn out, it may cause vibration. Careful inspection of the various components, timely replacement or repair is a good solution.