The reducer is an indispensable part of the Raymond mill. Under normal circumstances, the life of the reducer is generally around 15 years, which should be an important part of durability. It is very helpful for the whole machine to work. However, each type of equipment has its wearing parts. Among them, the wearing parts of Raymond mill equipment are: reducer, wear parts, analyzer, patented grinding stick assembly, fan, high pressure grinding device, plum blossom frame, etc. . The reducer is a power transmission mechanism, which reduces the motor speed by mechanical transmission, reduces the output torque at the same time, reduces the load of the main engine while decelerating, and can effectively protect the motor part of the Raymond mill, greatly improved the performance of Raymond mill equipment.

The main role of the Raymond mill reducer
1. Increase the output torque while reducing the speed, and the torque output ratio is multiplied by the motor output by the reduction ratio;
2. Deceleration also reduces the inertia of the load, and the reduction of inertia is the square of the reduction ratio.

Maintenance of the Raymond mill reducer
As a more important device in the Raymond mill system, the reducer plays a big role in the production of milling. Under normal circumstances, we have to make the first oil change after 200-260 hours of operation of the reducer. Note that when changing the oil of the reducer, it should be carried out under the condition that there is no danger of burning after the reducer is cooled, so as to avoid production failure. In addition, in the operation of Raymond mill, the staff should carry out regular inspections on the operation of the reducer. When the power of the equipment is too large, the corresponding maintenance work should be done to avoid reducing the service life of the equipment.

Leave a Reply

Your email address will not be published. Required fields are marked *

Chinese Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian