Generally speaking, if you want to make a large amount of powder in the production process of the mill, high output, there are the following requirements:
Scientific And Reasonable Match
When the mill is working, on the one hand, it must be considered whether the equipment model selection can meet the daily production needs to avoid equipment overload work; on the other hand, the material selection, try to choose a moderate hardness to prevent the material from being too hard , It is difficult to realize the grinding operation, which is blocked at the discharge port, which makes the powder discharge difficult.
Reasonably Select the Speed of the Host Machine and Improve the Grinding Force of the Host Machine
Considering the load-bearing capacity of the host motor is a factor to improve the production efficiency of the suspended roller mill. Increase the kinetic energy of the mill, adjust the belt or replace it with a new one.
After using the lime grinder for a period of time, it should be repaired, and at the same time, repair and replace the wearing parts such as the grinding ring blade of the grinding roller. Whether the lubricating grease is added enough. In addition, when the grinding roller device is used for more than 500 hours or when the grinding roller is replaced, the rolling bearings in the roller sleeve need to be cleaned, and the damaged parts should be replaced in time.