The operation of Raymond mill grinding production system includes the before starting operation and after startup operation details of Raymond mill machine. To learn these operations will be help for clients’ understanding of Raymond mill operation and it will avoid some unnecessary damage and costs caused by improper operation.
Before Starting Operation Details Of Raymond Mill
Before starting operation Raymond mill, it needs to do more and more works. It needs to check Raymond mill inside parts wear parts worn situation. When the wear parts are worn seriously, it needs to change them. The energy of working system is the electric energy. Before the machine works, you need to check the electric circuit is normal and there is no abnormal situation. Before Raymond mill work, it needs to add oil. Some parts need handle lubrication and some parts need thin oil lubrication. The handle lubrication will need open the machine inside bearing parts and clean them to lubricating. Thin oil lubrication can directly adding oil.
The parts inside the Raymond mill are connected by the bolts of other fixed devices. Before starting the Raymond mill, clients need to tighten the bolts and prevent the machine is loose and have dangerous.
Before the Raymond mill works, it needs to adjust the classifier speed and motor exhaust air volume. It is connected to the outside through the belt conveyor. The host is connected with motor through belt and gets energy from motor. Clients need to check the belt before starting the machine.
After Startup Operation Detailed Of Raymond Mill
When you have done the before starting operation details of Raymond mill, you can start up the machine. The details of Raymond mill include: when the Raymond mill works, all the watching doors are closed and they cannot be open. It is used to prevent the inner materials will hurt people. In the working process of Raymond mill, it cannot have the operation work, maintain work, no lubrication and these can guarantee the machine in normal operation state. In the working process, if you hear some abnormal voice or vibration, you need to stop the machine at once and check it. When you are ensure that this machine is OK and it can go on working continuously. All the clients need to remember this: when the Raymond mill system stops in the processing process, you need to discharge the inside materials in the mill before next start up.